Underfloor Heating Repairs Across Bedfordshire, Hertfordshire, Buckinghamshire and North London
An underfloor heating fault leaves your home cold and can be hard to trace. Our engineers diagnose and repair underfloor heating faults across Bedfordshire, Hertfordshire, Buckinghamshire and North London.
Underfloor Heating Faults We Repair
Common underfloor heating problems we diagnose and fix.
Zone Not Heating
One zone or room of the underfloor heating is not warming up while others work. Usually caused by a faulty actuator on the manifold, a failed zone valve, trapped air in the loop or a problem with the thermostat for that zone.
No Heat at All
The entire underfloor heating system is not warming up. Could be a failed pump, a faulty blending valve on the manifold, a boiler fault or a control system problem. We trace the cause systematically.
Leak in Underfloor Pipe
Suspected leak in an underfloor heating pipe buried in the floor. We use thermal imaging to pinpoint the leak location so only the minimum floor area needs opening for the repair.
Manifold Problems
Leaks from the manifold, faulty flow meters, broken actuators or a failed blending valve. The manifold is the heart of the system and faults there affect the whole underfloor heating.
Thermostat or Control Fault
The room thermostat is not calling for heat, the wiring centre has a fault or the programmer is not switching zones correctly. We test and replace faulty controls and wiring.
Uneven Heat Distribution
Some areas of the floor are warm while others are cold. Can be caused by a partially blocked pipe loop, trapped air, incorrect flow rates at the manifold or a problem with the pipe layout.
What Our Underfloor Heating Repairs Include
Why Choose Us for Underfloor Heating Repairs
Proper Diagnosis
Underfloor heating faults are harder to trace than radiator faults. We use thermal imaging and systematic testing to find the exact cause without guesswork.
Minimal Damage
If a repair needs the floor opening we use thermal imaging to pinpoint the exact location. Only the minimum floor area is opened for the repair.
Same Day Fix
We carry common underfloor heating parts including actuators, blending valves and thermostats. Most faults are fixed on the first visit.
Local Across Four Counties
Our underfloor heating repair engineers cover Bedfordshire, Hertfordshire, Buckinghamshire and North London.
Underfloor Heating Repairs Near You
Our underfloor heating repair engineers cover homes across four counties.
Underfloor Heating Repair FAQs
Common questions about underfloor heating repairs
Why is one zone of my underfloor heating not working?
The most common cause is a failed actuator on the manifold for that zone. Actuators are the small white caps on the manifold that open and close each loop. If the actuator fails that zone stays cold. Other causes include a faulty thermostat or trapped air.
How do you find a leak in underfloor heating pipe?
We use a thermal imaging camera to scan the floor. Warm water escaping from a leak creates a hot spot on the thermal image. This pinpoints the leak location so we only open the minimum floor area needed for the repair.
Can an underfloor heating pipe be repaired?
Yes. Once we locate the leak we can cut out the damaged section of pipe and join in a new section using specialist underfloor heating couplings designed to be buried in screed. The repair is tested before the floor is made good.
Why is my underfloor heating taking so long to warm up?
First check the boiler temperature is set correctly for underfloor heating. The blending valve on the manifold may be set too low. Also check the pump is running and flow meters show flow through each loop. Air in the system will also slow warm up.
What is a blending valve and why does it fail?
The blending valve mixes hot water from the boiler with cooler water returning from the floor to maintain the correct temperature for the underfloor heating. If it fails the floor may be too hot or too cold. We can repair or replace the blending valve.
How do I maintain my underfloor heating system?
We recommend an annual check of the manifold, pump, blending valve and actuators. The system water should be tested and inhibitor topped up. Actuators have a finite life and may need replacing after several years. We offer underfloor heating maintenance services.
Underfloor Heating Repair Enquiry
Tell us about your underfloor heating problem and we will diagnose and fix it.
No heat? Call 0330 043 3748 now